GoCode stainless in-floor shower pan with a center drain

Stainless in-floor shower pan with a corner drain and cross break bottom

In-floor shower pan recessed into a van floor during a build

Universal Shower Curtain zipped up over the in-floor shower pan in a van

Inside view of the magnetic curtain sealed to the in-floor shower pan

In-floor shower pan with a bottom right corner drain

In-floor shower pan with a bottom left corner drain

Top view of the corner drain version of the in-floor shower pan

Close-up of the in-floor shower pan drain opening

In-floor shower pan set into a van subfloor

In-floor shower pan installed in a van floor beside the cabinets

Detail of the brushed stainless around the in-floor pan drain

1-1/2 inch threaded straight drain fitting included with the shower pan

Dimension drawing of the center drain in-floor shower pan

Dimension drawing of the bottom left / top right drain shower pan

Dimension drawing of the bottom right / top left drain shower pan

GoCode

Stainless Steel In-Floor Shower Pan

$675.00

Shop 5.0 Shop rating (174) on Google

Own this? Write the first review

Product variants

A shower that hides in your floor.

The GoCode Stainless Steel In-Floor Shower Pan recesses flush into your subfloor, so it's out of the way until you need it. A cross break in the bottom sends water to the drain, and the brushed 2205 stainless is magnetic, so the Universal Shower Curtain seals right to the pan edge with no clips or track.

Fits: Universal, any van (Sprinter, Transit, ProMaster), trailer or RV with at least 1.3 in of subfloor depth. Designed for full-size vans. Not compatible: floors thinner than that (see the Slim In-Floor Shower Pan), or a ProMaster without a leveling kit.

30 x 24 in overall, 28 x 22 in recessed area, 1.31 in deep
Brushed magnetic 2205 stainless, 24.6 lb
Cross break bottom directs water to the drain
1-1/2 in threaded straight drain fitting included
Center or corner drain positions

Choose your variant: pick a drain location (Center, Bottom Right / Top Left, or Bottom Left / Top Right) and whether to add the shower curtain. The corner drains sit on a diagonal, so rotating the pan 180 degrees moves a bottom right drain to the top left. Pick the spot where the drain clears your chassis.

Other sizes: the Slim In-Floor Shower Pan for thin floors, or the Deep In-Floor Shower Pan. Want a shower that folds away instead? See the FOLD Shower.

See it on your van. Add the Stainless Steel In-Floor Shower Pan to your build in our 3D Van Builder and preview it on a real Sprinter before you buy.

Product Details

Why an in-floor pan

An in-floor pan gives you a permanent shower spot without a raised tray to trip over. It sits just over 1 in below floor level, so you keep your headroom, and with the curtain packed away it's just part of the floor.

Magnetic edge, no hardware

The 2205 stainless is magnetic, so the Universal Shower Curtain grabs the inside edge of the pan with its sewn-in magnets. No clips, no track, no extra holes. GoCode also offers 6 in strap extenders to bring the curtain up to roof height.

Pick your drain position

The hardest part of an in-floor shower is finding a drain spot that clears the frame rails, crossmembers and lines under the van. That's why this pan comes with a center drain or one of two corner drains. The corner versions can be rotated 180 degrees, which gives you four corner positions to work with.

Fitment & Compatibility

Fits: Universal, any van: Sprinter, Transit, ProMaster (with leveling kit), trailers and RVs with 1.3 in+ subfloor

Not compatible with: Subfloors under 1.3 in deep, or a ProMaster without a leveling kit

Not sure your build qualifies? Reach out to our team.

Specifications

Brand	GoCode
Fitment	Universal, any van, trailer or RV with 1.3 in+ subfloor depth
Overall size	30 x 24 in
Recessed area	28 x 22 in
Depth	1.31 in
Flange width	1 in
Drain diameter	2.01 in, 1-1/2 in threaded straight drain fitting included
Drain location	Center, Bottom Right / Top Left, or Bottom Left / Top Right
Material	2205 stainless steel, magnetic, brushed
Weight	24.6 lb
Curtain option	Add Shower Curtain or No Shower Curtain

What's in the Box

Stainless Steel In-Floor Shower Pan, brushed
1-1/2 in threaded straight drain fitting with gasket nut
Universal Shower Curtain (Add Shower Curtain variants only)

Install Time1 hour

DIY FriendlyIntermediate

Drilling RequiredYes, floor cutout and drain hole

Installing the pan means cutting an opening in your floor, drilling a drain hole and setting the pan in adhesive. GoCode estimates about 1 hour of work plus an overnight cure. Plumb the drain after it sets.

Key measurements (from GoCode's install guide)

Floor opening: 22 x 28 in, cut inside the line
Drain hole: 2-3/4 in
Subfloor depth: GoCode's install guide calls for at least 1-3/8 in (1.3 in absolute minimum on the product listing)
Drain fitting: 1-1/2 in NPT with gasket nut, included

Mistakes to avoid

Check under the van before you cut. The drain has to clear frame rails, crossmembers, brake and fuel lines.
Your van needs to sit level for the pan to drain. ProMasters sit nose-down from the factory and need a leveling kit first.
Prime the cut metal edges before you set the pan.
Dry-fit the pan before you put down adhesive.
Let it cure overnight. A little weight in the pan helps while it sets.
Check curtain clearance above the pan before you commit to the location.

GoCode recommends adhesive under the flange plus at least 1 in countersunk screws through the flange into the subfloor. Want it done for you? Reach out to our team at products@sandyvans.com or (619) 812-1903 about a shop install.

Tools You'll Need

Drill with a 2-3/4 in hole bit
Saw for the floor opening
Tape measure and marker
Silicone adhesive
Primer for cut metal
1-1/2 in threaded fitting for your drain line

See all Sandy Vans install videos & manuals →

How to choose an in-floor shower pan

1. How thick is your subfloor?

An in-floor pan needs enough depth to recess flush.

How to choose: With 1.3 in or more, this standard pan works. With only 3/4 in, choose the Slim In-Floor Shower Pan. For a deeper basin with tall sides for wall panels, see the Deep In-Floor Shower Pan.

2. Where can the drain go?

The drain has to clear everything under the floor.

How to choose: Look under the van at your planned shower spot, then pick Center, Bottom Right / Top Left, or Bottom Left / Top Right to match the clear spot.

3. Is your van level?

The cross break bottom drains when the van sits level.

How to choose: Sprinters and Transits are usually fine. ProMaster owners need a leveling kit before install.

4. Permanent pan or fold-away shower?

An in-floor pan takes a fixed spot on the floor, a folding shower only takes space while it's open.

How to choose: If you can't give up the floor space, look at the FOLD Shower.

5. How will you enclose it?

The pan edge is magnetic.

How to choose: Add the Universal Shower Curtain with the Add Shower Curtain variant for a complete setup.

Before you order

Subfloor depth measured (1.3 in or more)
Drain location checked under the van
Van sits level (ProMaster leveling kit planned if needed)
Curtain and hang point planned above the pan

How the GoCode In-Floor Pan stacks up

Subfloor: recesses about 1.31 in, sits flush with your floor
Drain: center or corner positions to clear your chassis
Leveling: cross break bottom sends water to the drain
Curtain: magnetic 2205 stainless edge, no clips or track

Which drain location should I pick?

Pick the one that clears the frame and lines under your van. The corner drains sit on a diagonal, so rotating the pan 180 degrees moves a bottom right drain to the top left, and the same for the other corner pair.

Will it fit my van?

Yes. It's universal and fits any van, trailer or RV with at least 1.3 in of subfloor depth. GoCode's install guide calls for 1-3/8 in.

Does it work in a ProMaster?

Yes, with a leveling kit. The ProMaster sits sloped toward the front from the factory, and the van needs to be level for the pan to drain.

Which curtain works with it?

The Universal Shower Curtain. Its 3/8 in magnets seal to the inside edge of the pan, it has a zippered front entry and it's about 72 in tall.

What if my floor is thinner?

Go with the Slim In-Floor Shower Pan. It needs only 3/4 in of subfloor depth.

Do you install products for customers?

Yes. Many SV products can be professionally installed at our San Diego shop. Reach out to our team to schedule. Email products@sandyvans.com or call 619-812-1903.

What is your shipping and return policy?

Most SV products ship free. For returns, see our Returns & Refunds policy or reach out to our team at products@sandyvans.com.

Can I reach a real person with questions?

Always. We are a small team in San Diego. Email products@sandyvans.com or call 619-812-1903 and you'll get a real answer, not a chatbot.

Where are you located?

9393 Trade Pl, San Diego, CA. Come visit the shop, we'd love to show you around.

Does Sandy Vans offer financing?

Yes. Many financing options are available. Set up a call with a sales associate to learn more.

Still have a question? Email the team and you'll get a real answer.