Lagun Table System in black with leg, arm, table plate, bracket and bolt kit

Lagun Table System in silver aluminum with leg, arm, table plate and bracket

Lagun table set up over a Mercedes Sprinter van dinette

Rear view into a Sprinter van build with a Lagun table over the dinette

Small Lagun-mounted table between bench seats in a camper van

Lagun Table System dimensions diagram with arm, leg and plate measurements

Lagun table front and side dimension drawing with 23 in leg height

Underside of a tabletop attached to the Lagun table mounting plate

Lagun table graphic showing height, swing and 360 degree rotation

Lagun table mount with callouts for the rotating handles and leg room

Lagun table between seats in a Mercedes Sprinter van

Bamboo tabletop on a Lagun mount over a van dinette

Sprinter van interior with two benches and a Lagun table between them

Person seated at a Lagun-mounted table in a Mercedes Sprinter dinette

Lagun

Lagun Table System

$299.00

Shop 5.0 Shop rating (174) on Google

Color: Black

Black Silver

Product variants

Pickup available at Sandy Vans HQ

Usually ready in 2-4 days

A table that swings out when you eat and gets out of the way when you don't.

The Lagun Table System mounts to the side of a bench or cabinet instead of the floor. The leg slides up and down, the arm swings in any direction and the table plate spins a full circle, and each joint locks on its own. Lift the whole system out of its bracket to stow it or move it outside.

Fits: universal, any van, RV or boat with a solid bench or cabinet face to bolt the bracket to. Built for dinette and bench-seat layouts. Not compatible: round tube-style table legs or floor-mounted bases.

Moves three ways: leg height, arm swing and 360° plate rotation, each with its own lock
Holds 50 lb total, including the tabletop, on tops up to 30 x 40 in
Anodized aluminum that resists rust and salt water corrosion
More leg room: no floor post under the table
Complete kit: leg, arm, table plate, standard bracket with bolt kit and end caps (tabletop not included)

Choose your variant: black or silver anodized aluminum. Same parts, dimensions and weight rating in either color. The leg handle is on the right side.

Need a top? Pair it with our Custom Bamboo Table Top.

See it on your van. Add the Lagun Table System to your build in our 3D Van Builder and preview it on a real Sprinter before you buy.

Product Details

Why Lagun ends up in so many builds

A floor-mounted table eats leg room and blocks the aisle. The Lagun hangs off the side of your bench instead, so you can swing it over your lap, push it out of the way or pull it out entirely when the dinette turns into a bed.

What's in the kit

Standard leg with a right-side handle and leg end cap
Arm with 2 bushings, 2 end caps and 2 handles installed
Table mounting plate, 9-7/16 x 7-7/8 in, with end caps
Standard bracket with 4 bolts (2 in), nuts and washers

Pick a top

Any top up to 30 x 40 in works within the 50 lb limit. Our Custom Bamboo Table Top is sized for van dinettes.

Fitment & Compatibility

Fits: Universal: vans, RVs, boats

Not compatible with: Round tube-style table legs; floor-mounted bases

Not sure your build qualifies? Reach out to our team.

Specifications

Brand	Lagun
System	Standard leg with standard bracket
Colors	Black or silver anodized aluminum
Handle position	Right side of the leg
Weight capacity	50 lb total, including the tabletop
Max tabletop	30 x 40 in
Leg height	23 in from the bottom of the leg to the top of the table plate
Height adjustment	16-1/2 in slotted groove; 11-1/2 in range with one handle (6 in up, 5-1/2 in down)
Rotation	Arm swings and table plate turns 360°, each lockable
Table mounting plate	9-7/16 x 7-7/8 in
Mounting bracket	Standard, 3-1/2 x 6-11/16 in, with 4 bolts (2 in), nuts and washers
End caps	Leg end cap and 2 table plate end caps installed; 2 arm end caps installed
Tabletop	Not included
Fitment	Universal: vans, RVs, boats

What's in the Box

Standard leg (right-side handle) with end cap
Arm with bushings, end caps and handles
Table mounting plate with end caps
Standard bracket
Bolt kit: 4 bolts (2 in), 4 nuts, 4 washers

DIY FriendlyEasy

Drilling RequiredYes, to mount the bracket

Bolt the standard bracket to a solid bench or cabinet face with the included bolt kit, slide the leg into the bracket, then attach the arm and your tabletop to the table plate.

Mistakes to avoid

Mounting to a thin or hollow panel. The bracket carries the whole table, so back it with solid material.
Placing the bracket where the leg's slotted groove can't reach it. The bracket must sit within the 16-1/2 in groove.
Going over 50 lb, tabletop included.
Driving with an outside-mounted table still up.

Tools You'll Need

Drill and bits
Wrench or socket for the bracket bolts
Tape measure and level
Screwdriver for the tabletop screws

See all Sandy Vans install videos & manuals →

How to choose a van table mount

1. What can it mount to?

How to choose: Side-mount systems need a solid bench or cabinet face. If you only have floor space, look at a floor base.

2. How big is your top?

How to choose: Stay within the system's limits. The Lagun takes tops up to 30 x 40 in and 50 lb total.

3. How do you use the space?

How to choose: If the dinette becomes a bed, pick a mount you can swing away or lift out. The Lagun does both.

4. Finish

How to choose: Match your interior hardware: black or silver anodized aluminum.

Before you order

Bracket location picked on a solid surface
Tabletop size under 30 x 40 in
Color chosen

How the Lagun stacks up

Movement: height, swing and 360° rotation with independent locks.
Strength: 50 lb total.
Space: no floor post.
Add a Custom Bamboo Table Top.

Is a tabletop included?

No. The Lagun system takes a top up to 30 x 40 in, and you may be able to reuse your existing one. Our Custom Bamboo Table Top is made to pair with it.

How much weight can it hold?

50 lb total, and that includes the tabletop and anything on it.

Which side is the handle on?

The leg handle is on the right side. That's the only version we stock.

What does it mount to?

The bracket bolts to a solid vertical surface, usually the side of a bench, bed platform or cabinet. It does not work with round tube-style table legs, because the system is only as strong as the bracket install.

Black or silver: is there a difference?

Only the finish. Both are anodized aluminum with the same parts, dimensions and weight rating. The black finish can vary slightly in shade, and the bolts are silver on both.

Can I use it outside?

Yes. Some customers add a second bracket outside. Lagun's rule: if it's mounted outside, take the system down and stow it before you drive.

Is it hard to install?

No. Mount the bracket with the included bolt kit, slide the leg in, and set the height. Reach out to our team at products@sandyvans.com or (619) 812-1903 if you want help planning the location.

Do you install products for customers?

Yes. Many SV products can be professionally installed at our San Diego shop. Reach out to our team to schedule. Email products@sandyvans.com or call 619-812-1903.

What is your shipping and return policy?

Most SV products ship free. For returns, see our Returns & Refunds policy or reach out to our team at products@sandyvans.com.

Can I reach a real person with questions?

Always. We are a small team in San Diego. Email products@sandyvans.com or call 619-812-1903 and you'll get a real answer, not a chatbot.

Where are you located?

9393 Trade Pl, San Diego, CA. Come visit the shop, we'd love to show you around.

Does Sandy Vans offer financing?

Yes. Many financing options are available. Set up a call with a sales associate to learn more.

Still have a question? Email the team and you'll get a real answer.