SEAFLO

33 Series 3.0 GPM Water Pressure System

$195.00 $185.00 Save 5%
Own this? Write the first review

Pickup available at Sandy Vans HQ

Usually ready in 2-4 days

A pre-built water pump system that's quiet, steady and ready to plumb.

The SEAFLO 33 Series pressure set comes fully assembled on one mounting board: a 3-chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick-connect wiring. It delivers 3.0 GPM at a steady 45 PSI, enough for 3 fixtures, and can run dry without damage.

Fits: Universal 12V water systems in vans, RVs and boats. Not compatible: 24V systems.

  • 3.0 GPM (11.3 LPM) at 45 PSI shut-off
  • Pre-assembled pump, strainer and accumulator on one board
  • Quiet, steady flow thanks to the accumulator
  • Self-priming up to 6 ft of lift
  • Runs dry without damage
  • 1/2 in MNPT ports

Pair it with the Duoetto Gen 3 water heater.

See it on your van. Add the 33 Series 3.0 GPM Water Pressure System to your build in our 3D Van Builder and preview it on a real Sprinter before you buy.

Product Details

Why a pre-built pressure set

Assembling a pump, strainer and accumulator from parts takes fittings, leaks and guesswork. This set arrives built and mounted on a board, so you plumb two ports and connect power.

What you get

  • 3.0 GPM pump
  • Strainer
  • Accumulator tank
  • Mounting board

Fitment & Compatibility

Fits: Universal 12V water systems in vans, RVs and boats

Not compatible with: 24V systems

Not sure your build qualifies? Reach out to our team.

Specifications

BrandSEAFLO
ModelSFWSK1-030-045-002
Voltage12V
Open flow3.0 GPM / 11.3 LPM
Shut-off pressure45 PSI / 3.1 bar
Max draw8.0A
Suction lift6 ft
Max water temp140°F
Ports1/2 in-14 MNPT
Fixtures3-4
Noise60 dB
Leads16 AWG, 4.5 in, 2-pin connector
Duty cycleIntermittent

What's in the Box

  • Pump, strainer and accumulator on a mounting board
  • Quick-connect wiring
DIY FriendlyEasy
Drilling RequiredYes, to mount the board

Screw the board down near your fresh tank, plumb the 1/2 in MNPT inlet and outlet, and connect 12V with an inline fuse. Reach out to our team at products@sandyvans.com or (619) 812-1903 with questions.

Tools You'll Need

  • Drill and driver
  • Pipe thread sealant
  • Wire crimper

See all Sandy Vans install videos & manuals →

How to choose a van water pump

1. Flow

How to choose: 3.0 GPM covers a sink and shower.

2. Noise

How to choose: An accumulator smooths flow and cuts cycling.

3. Install

How to choose: A pre-assembled set saves fittings and time.

Before you order

  • 12V circuit planned
  • Fresh tank location set

How it stacks up

  • 3.0 GPM at 45 PSI
  • Pre-assembled
  • Runs dry safely
How many fixtures can it run?
Up to 3 or 4, like a sink, shower and outdoor shower.
What fuse should I use?
It draws up to 8A. Size the fuse and wire to that load and your wire length.
Can it run dry?
Yes, without damage, though it's best to keep the tank filled.
Is it loud?
It's rated at about 60 dB, and the accumulator keeps it from cycling constantly.
Do you install products for customers?
Yes. Many SV products can be professionally installed at our San Diego shop. Reach out to our team to schedule. Email products@sandyvans.com or call 619-812-1903.
What is your shipping and return policy?
Most SV products ship free. For returns, see our Returns & Refunds policy or reach out to our team at products@sandyvans.com.
Can I reach a real person with questions?
Always. We are a small team in San Diego. Email products@sandyvans.com or call 619-812-1903 and you'll get a real answer, not a chatbot.
Where are you located?
9393 Trade Pl, San Diego, CA. Come visit the shop, we'd love to show you around.
Does Sandy Vans offer financing?
Yes. Many financing options are available. Set up a call with a sales associate to learn more.

Still have a question? Email the team and you'll get a real answer.

33 Series 3.0 GPM Water Pressure System $185.00