GoCode

Slim In-Floor Shower Pan

$725.00
Own this? Write the first review
Shower Curtain

For floors that don't have an inch to spare.

The GoCode Slim In-Floor Shower Pan is the low-profile version of the Stainless Steel In-Floor Shower Pan. It needs only 3/4 in of subfloor depth, so it works in builds with thinner floor assemblies where the standard pan won't fit. It recesses flush, so there's no tray to trip over, and the magnetic stainless edge holds the Universal Shower Curtain with no clips or track.

Fits: Universal, any van (Sprinter, Transit, ProMaster), trailer, truck camper, pop-up or fifth wheel with at least 3/4 in of subfloor depth. Not compatible: builds that need the pan to self-drain on a level floor. The bottom is flat, so plan a slight slope or a squeegee.

  • Needs only 3/4 in of subfloor
  • 24 x 24 in overall, 22 x 22 in recessed area
  • Brushed magnetic stainless for the curtain magnets
  • Center drain with a 1-1/2 in threaded straight drain fitting
  • Flush install, no trip hazard

Choose your variant: No Shower Curtain is the pan only. Add Shower Curtain includes the Universal Shower Curtain.

Have more floor depth? The standard In-Floor Shower Pan has a sloped cross break bottom.

See it on your van. Add the Slim In-Floor Shower Pan to your build in our 3D Van Builder and preview it on a real Sprinter before you buy.

Product Details

Why go slim

Every bit of floor thickness in a van comes out of your headroom. The standard In-Floor Shower Pan needs 1.3 in of subfloor. The Slim needs only 3/4 in, so it fits builds with a thinner floor and keeps the shower flush with everything around it.

The trade-off: a flat bottom

To get that thin, the Slim has a flat bottom with no built-in drainage angles. On a level floor the water won't run to the drain by itself. Build in a slight slope toward the drain, or keep a squeegee handy after you shower.

Make it a full shower

The magnets in the Universal Shower Curtain grab the 3/4 in pan edge for a watertight seal. Choose the Add Shower Curtain variant to get both.

Fitment & Compatibility

Fits: Universal, any van: Sprinter, Transit, ProMaster, trailers, truck campers, pop-ups and fifth wheels with 3/4 in+ subfloor

Not compatible with: Builds that need the pan to self-drain on a level floor (flat bottom)

Not sure your build qualifies? Reach out to our team.

Specifications

BrandGoCode
FitmentUniversal, any van, trailer or camper with 3/4 in+ subfloor
Overall size24 x 24 in
Recessed area22 x 22 in
Total depth0.85 in (GoCode drawing)
Minimum subfloor3/4 in
Flange width1 in
DrainCenter, 2.01 in, 1-1/2 in threaded straight drain fitting included
BottomFlat, no built-in drainage angle
MaterialBrushed magnetic stainless steel
Curtain optionAdd Shower Curtain or No Shower Curtain

What's in the Box

  • Slim In-Floor Shower Pan, brushed stainless
  • 1-1/2 in threaded straight drain fitting
  • Universal Shower Curtain (Add Shower Curtain variant only)
DIY FriendlyIntermediate
Drilling RequiredYes, floor cutout and drain hole

The Slim installs like GoCode's standard in-floor pan: cut a floor opening, drill the drain hole, and set the pan in adhesive with countersunk screws through the flange. GoCode doesn't publish a separate manual for the Slim, so follow the standard pan steps and reach out with any questions.

Key measurements

  • Recessed area: 22 x 22 in (overall 24 x 24 in with a 1 in flange)
  • Subfloor depth: at least 3/4 in
  • Total depth on GoCode's drawing: 0.85 in
  • Drain: 2.01 in opening, 1-1/2 in threaded straight drain fitting included

Mistakes to avoid

  • Plan for drainage. The bottom is flat, so build in a slight slope toward the drain or plan to squeegee after each shower.
  • Check under the van before you cut so the center drain clears frame rails and lines.
  • Dry-fit the pan before you put down adhesive.
  • Prime any cut metal and let the adhesive cure before you plumb.

GoCode recommends adhesive under the flange plus at least 1 in countersunk screws through the flange into the subfloor. Questions? Reach out to our team at products@sandyvans.com or (619) 812-1903.

Tools You'll Need

  • Drill and hole saw for the drain
  • Saw for the floor opening
  • Tape measure and marker
  • Adhesive
  • Primer for cut metal
  • 1 in countersunk screws

See all Sandy Vans install videos & manuals →

How to choose an in-floor shower pan

1. How thick is your subfloor?

This is the deciding factor.

How to choose: Under 1.3 in but at least 3/4 in, choose the Slim. 1.3 in or more, the standard pan drains on its own and offers corner drains.

2. Can your floor slope to the drain?

The Slim has a flat bottom.

How to choose: If you can build in a slight slope, or don't mind a squeegee, the Slim works well.

3. Where can the drain go?

The Slim has a center drain only.

How to choose: Check that the center of your planned shower spot is clear underneath. If it isn't, look at the standard pan's corner drain options.

Before you order

  • Subfloor depth measured (3/4 in or more)
  • A slope or squeegee plan
  • Center drain clears the chassis
  • Curtain and hang point planned

How the GoCode Slim stacks up

  • Subfloor: needs only 3/4 in
  • Profile: flush with the floor, no trip hazard
  • Curtain: magnetic stainless edge
  • Drain: center drain with fitting included
Will it drain on its own?
Not on a level floor. The Slim has a flat bottom, so plan a slight slope toward the drain or use a squeegee after showering.
Will it fit my van?
Yes. It's universal and fits any van, trailer, truck camper, pop-up or fifth wheel with at least 3/4 in of subfloor depth.
Slim or standard pan?
If your subfloor is at least 1.3 in deep, the standard pan has a sloped bottom and corner drain options. If you only have 3/4 in to work with, go Slim.
Which curtain works with it?
The Universal Shower Curtain. Its 3/8 in magnets seal to the inside edge of the pan, it has a zippered front entry and it's about 72 in tall.
What's included with Add Shower Curtain?
The Slim pan, the drain fitting and the Universal Shower Curtain.
Do you install products for customers?
Yes. Many SV products can be professionally installed at our San Diego shop. Reach out to our team to schedule. Email products@sandyvans.com or call 619-812-1903.
What is your shipping and return policy?
Most SV products ship free. For returns, see our Returns & Refunds policy or reach out to our team at products@sandyvans.com.
Can I reach a real person with questions?
Always. We are a small team in San Diego. Email products@sandyvans.com or call 619-812-1903 and you'll get a real answer, not a chatbot.
Where are you located?
9393 Trade Pl, San Diego, CA. Come visit the shop, we'd love to show you around.
Does Sandy Vans offer financing?
Yes. Many financing options are available. Set up a call with a sales associate to learn more.

Still have a question? Email the team and you'll get a real answer.

Slim In-Floor Shower Pan $725.00